F240
The ARGUS F240 tests GPON and XGS-PON connections using a selective power meter and can, as an option, perform a full ONT simulation with IP and performance tests up to 10 Gbit/s.
The fibre-optic tester for 10G speed tests
The ARGUS F240 can perform a complete ONT simulation on GPON and XGS-PON interfaces, including IP and performance tests at speeds of up to 10 Gbit/s.
The selective 4xOPM can be switched into an existing PON connection in Through Mode whilst simultaneously determining the optical levels on the downstream (OLT) and upstream (ONT) wavelengths for GPON and XGS-PON. Other transmitters on the line (alien ONTs) can be detected. The PON ID can be read from the PLOAM message. A PLOAM monitor scans ONU IDs and serial numbers of connected ONTs on a PON branch.
With the 5xOPM, a video overlay via five separate filters is available as an option. The optional Optical Loss Test with 2λ or 4λ OLS provides a level measurement for an adjustable wavelength, including attenuation calculation. The PON-FMT option in accordance with ZTV43 supports guided acceptance tests with automatic target value calculation and OK/nOK evaluation.
Further test functions include a WLAN analyser, triple-play tests such as VoIP and IPTV, as well as data tests including upload/download, ping, traceroute, iperf or IP speed tests on fibre-optic or Ethernet. The SFP slot can be used, amongst other things, for Active Ethernet (AON) in FTTH installations.
Selective OPM for GPON and XGS-PON
The selective power meter measures downstream and upstream levels and can be connected to an existing PON connection in through mode.
Optional ONT simulation up to 10 Gbit/s
ONT simulation, 2.5- and 10-gigabit Ethernet, and RFC 6349 are optional features.
A quick start in the field
A boot time of 16 seconds, a tile-based menu and quick tests take you straight to the measurement.
PON ID and acceptance
PON-ID, PLOAM Monitor and PON-FMT, in accordance with ZTV43, support testing and documentation.
Interfaces and measurement functions
The ARGUS F240 can be configured for different networks and measurement tasks. The following overview shows which interfaces and functions belong to the base unit and which are available as optional equipment.
Fibre-optic cables and PON
Selective xPON-OPM is included as standard. ONT simulation and PON-FMT are optional features.
- GPON Included
- XGS-PON Included
- Selective 3xOPM Included
- PLOAM Monitor Included
- SFP port for FTTx Included
- ONT simulation Optional
- xPON-ID Optional
- PON-FMT in accordance with ZTV 43 Optional
- Selective 4xOPM with Through Mode Optional
- Selective 5xOPM with Through Mode Optional
- Optical Fault Locator (OTDR-based) Optional
- Fibre Inspection Tool Optional
- Optical Light Source Optional
- Optical Loss Test Set Optional
- Visual Fault Locator Optional
Ethernet and IP
IP ping, traceroute and HTTP/FTP are included as standard. Higher data rates and RFC 6349 are optional.
- IP ping and traceroute Included
- HTTP/FTP downloads and uploads Included
- Web browser Included
- 10 Gigabit Ethernet Optional
- ARGUS Real Speed Formal (RFC6349) Optional
- Speed tests up to 2.5 Gbit/s Optional
- Network scan Optional
- ARGUS Real Speed Direct (iperf) Depends on configuration
- Speed tests up to 10 Gbit/s Depends on configuration
WLAN and Services
WLAN management is included as standard. IPTV, VoIP (including MOS) and fibre inspection are optional.
- WLAN management Included
- FW Update Included
- Configuration Import Included
- Upload of measurement reports Included
- Cloud services Included
- Remote access (VNC) Included
- PC software Included
- ARGUS Mobile App Included
- ARGUS pedia Included
- WLAN test Optional
- WLAN Spectrum Analysis/2G4 Scope Optional
- ARGUS WLAN analyser Optional
- Wi-Fi 7 module Optional
- VoIP + MOS Optional
- IPTV Optional
- OTT (Adaptive Streaming) Optional
Areas of application
Acceptance and documentation
Measurement logs, HTML reports and cloud connectivity facilitate acceptance testing without the need to transfer values manually at a later stage.
Fault clearance
If faults occur on a live network, optional tools such as TDR, line monitor, OTDR or PON measurements can help – depending on the device configuration.
Installation and commissioning
Technicians check the new connection on site, document the interfaces and provide the network operator with a clear set of measurement results.
Performance and service tests
Ethernet, IP and service tests show whether the guaranteed data rates and services are reaching the customer.
Downloads
Datasheets, manuals and further documents for this device.
Firmware
PC software
Brochures
Technical articles
Technical articles
Simple fibre testers for the rapid roll-out of GPON and XGS-PON networks
DownloadTechnical articles
Sencillos comprobadores de fibra para la rapida expansion de redes GPON y XGS-PON
DownloadTechnical articles
Eenvoudige glasvezeltesters voor snelle uitbreiding van GPON en XGS-PON-netwerken
DownloadAccessories and add-ons
Extensions
Accessories
Ethernet patch cable (1:1)
Item no.: 004466
Manuals
Item no.: var.
Wrist strap
Item no.: 000005
Calibration Test Certificate
Item no.: 090050
SC/APC 8°-LC/APC 8° test cable
Item no.: 020040
SC/APC 8°-SC/UPC test cable
Item no.: 020041
SC/UPC attenuator
Item no.: 020050
USB-C switching power supply
Item no.: 020008
RJ45 T-connector
Item no.: 002555
Carrying strap 1
Item no.: 000006
Carry Bag 4
Item no.: 007005
Carry bag 5
Item no.: 007002
WLAN USB dongle
Item no.: 000250
WLAN USB dongle with antenna
Item no.: 000255
